Inateck Aluminum USB 3.0 Hard Disk Drive Enclosure for 2.5 Inch/ 3.5 Inch SATA HDD and SSD, Support UASP and 10TB Drives (FE3001)

  • Superspeed USB 3.0 connections up to 5 Gbps ;Built-in ASM1153E chipset supports SATA III with up to 6Gbps Signal bandwidth at for extra fast backups ; Support UASP targeted at SSD.
  • Compatibility with Windows XP/Vista/7/8/8.1/10, Linux/Android, Mac OS 10.3 and higher. Support all standard 2.5/3.5 inch SATA I/II/III drives (up to 10TB Max); Backwards compatible with USB 2.0/1.1 connections.
  • Internal layer of smooth and slip resistant PU leather, protection against scratches.
  • The durable Aluminum-alloy material promises ultra-light portability and exquisite craftmanship ; Featured with highly effective heat dissipation ; non-slipping rubber pads on all four corners; Two LEDs indicate power status ( Green ) and activity status (Blue ).
  • Plug and Play; Hot-swap, no reboot or additional drivers are needed; 12V/2A power adapter provides stable power supply.

Accelerate Your Backup with Turbo Speed
FE3001 connects your HDD to your PC via Superspeed USB 3.0. The built-in top-grade Jmicron ASM1153E chipset not only supports UASP (USB Attached SCSI Protocol) with a faster data transfer rate targeted for SSD, but also supports Serial ATA bus up to 6Gbps Signal bandwidth for even faster data backups – the possibilities are endless.

High Compatibility
FE3001 shows high compatibility with operating system environments Windows XP/Vista/7/8/8.1/10, Linux/Android, Mac OS. It supports all standard 2.5″/3.5″ SATA I/II/III drives up to any capacity (up to 10TB Max). Downward compatible with USB 2.0/1.1 connections.

Back Up Your Stuff – Anytime, Anywhere
FE3001 requires no reboot operation and no additional drives installation during the use. It goes anywhere – without getting in your way.

Durable and Sturdy
Made of Aluminum-alloy material, FE3001 is featured with an effective heat dissipation besides its ultra-light portability and exquisite craftmanship. The non-slipping rubber pads on the four corners of the case promise provide safety on every surface.

Designed with You in Mind
The 12V/2A power adapter guarantees a stable power supply. The individual green and blue LED lights represent power and activity status. The useful accessories bag plus rubber pads and screws round up the whole package.

Packing Content:
1x Inateck USB 3.0 HDD Case
1x 12V/2A Power Adapter
1x Accessories Bag (rubber pads and screws)
1x Screw Driver
1x 100cm (3.3ft) USB3.0 Cable
1x User Manual

Please note: The PCB plate must be fixed, otherwise they will rock

Lowest Price: £23.99
Buy from Amazon




Comments are closed.